环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Nonreciprocal properties of 1D magnetized plasma photonic crystals with the Fibonacci sequence

In this paper, the nonreciprocal properties of a novel kind of 1D magnetized plasma photonic crystals(MPPCs) with the Fibonacci sequence are investigated. The isolation of the proposed 1D MPPCs is also used to analyze the nonreciprocal properties. Compared to the conventional 1D MPPCs with periodic structure, the nonreciprocal performance can be significantly improved.The effects of several parameters of the proposed 1D MPPCs on the nonreciprocal properties are studied by the transfer matrix method, which includes the incident angle, order of the Fibonacci sequence, plasma frequency, plasma cyclotron frequency and plasma filling factor. The obtained results show that the nonreciprocal propagation properties can be improved by increasing the values of the plasma cyclotron frequency and incident angle, but they will worsen by blindly increasing the order of the Fibonacci sequence, plasma frequency and filling factor of plasma.The peaks of transmittance also are obviously reduced. In addition, the value of isolation will increase with increasing the incident angle, order of Fibonacci sequence, plasma frequency and plasma filling factor. However, when the plasma cyclotron frequency is increased, the value of isolation will be increased at lower frequencies, but is almost unchanged at higher frequencies.     

电磁搅拌对大圆坯结晶器冶金行为影响的探讨

 为了探究结晶器电磁搅拌(M EMS)对大圆坯结晶器内综合冶金行为的影响。以大断面圆坯连铸结晶器冶金行为为研究对象，基于电磁热流体与凝固传输理论建立三维耦合数值模型。揭示大圆坯连铸常用五孔水口浇注条件下结晶器内电磁场、流场、传热与凝固等综合冶金行为，提出电磁搅拌对结晶器冶金性能影响的多参量评价方法。以中碳铬钼齿轮钢650 mm大圆坯连铸为例，指出结晶器电磁搅拌存在最佳搅拌电流，可获得相对较好的综合冶金效果。具体表现为弯月面保持一定的切向速度和过热度，有利于保护渣的熔化和夹杂物的上浮去除；液面波动幅度在控制范围内，可避免卷渣、改善表面质量；结晶器内钢液过热得到有效耗散，有利于等轴晶形核改善铸坯内部质量；侧孔出流钢液速度得到有效控制，可抑制注流对初凝坯壳的冲刷，提高了初生坯壳生长的均匀性。此外，电磁搅拌产生的水平旋流强度也可得到有效控制，有利于避免常见的皮下白亮带现象。     

深圳抽水蓄能电站监控新技术应用研究与实践

通过对安防、工业电视和门禁等新技术的研究,设计了一套先进的监控系统,包括硬件平台、系统管理、应用软件,利用深圳抽水蓄能电站已形成的光纤网络通道把分布在方圆10 km范围内多个站端设备以环路的方式连接起来,把可靠成熟的新技术融合到整个平台。自首台机组成功投运,监控系统为电站正常运行保驾护航,高清摄像机、视觉识别、行为分析、边界防护等新技术的应用为工程项目增添了亮点,使电站现场管理更加智能化、规范化。     

Grafting of sulfamethoxazole on acrylic acid−vinyl methyl ketone copolymer using the schiff base reaction−application as a drug delivery system

A series of poly(acrylic acid-co-methylvinylketone–graft–sulfamethoxazole)(AVMDS) species was synthesized for drug carrier applications. The synthesis involved two steps: copolymerization of acrylic acid(AA) with methyl vinyl ketone(MVK) through the free radical route and subsequent grafting of the sulfamethoxazole (SMX) onto the copolymer via the Schiff base reaction of the primary amine of SMX with the carbonyl groups of the MVK units. The structures and properties of the materials were characterized by nuclear magnetic resonance(NMR), X-ray diffraction(XRD), differential scanning calorimetry(DSC), and scanning electronic microscopy (SEM). An in-vitro cytotoxicity test of the drug-carrier systems via MTT assay revealed no significant cytotoxic effect at concentrations up to 100?µg?·?ml^?1. The dynamic release of SMX from these systems through a retro-imidation reaction (inverse Schiff base reaction) was investigated in depth, where the diffusion through the polymer matrix, the enhancement of the water solubility of SMX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamics were evaluated. The AVMGS4 and AVMGS1 drug carrier systems containing 3.58 and 1.18?wt% of SMX were the best performing systems.     

基于人体关节点数据的攻击性行为识别

针对人体攻击性行为识别问题，提出一种基于人体关节点数据的攻击性行为识别方法。首先，利用OpenPose获得单帧图像中的人体关节点数据，并通过最近邻帧特征加权法和分段多项式回归完成由人体自遮挡和环境因素所导致缺失值的补全；然后，对每个人体定义动态"安全距离"阈值，如果两人真实距离小于阈值，则构建行为特征矢量，其中包括帧间人体重心位移、人体关节旋转角角速度和发生交互时的最小攻击距离等；最后，提出改进的LightGBM算法w-LightGBM，并对攻击性行为进行识别。采用公共数据集UT-interaction对所提出的攻击性行为分类识别方法进行测试实验，准确率达到95.45%。实验结果表明，所提方法能够有效识别各种角度的攻击性行为。     

热烧结矿竖式冷却过程传热特性

 与传统环冷相比，烧结竖冷拥有漏风率低、换热效率高的优势。为此利用竖冷试验装置，在某烧结厂取热风与热烧结矿研究了竖式冷却过程气固对流换热特性。研究表明，烧结矿竖式冷却过程中影响传热特性的主要因素为冷却风的流量及温度。烧结矿和冷却风对流换热系数随着烧结矿温度的升高而增大，且随着冷却风流量的增大以及冷却风温度的降低，对流换热系数也随之增大。基于白金汉定理，结合试验数据拟合得出了描述烧结矿与冷却风传热特性的准数关联式，其模拟性较好且平均相对误差为7.25%。     

Compressive strength and wear properties of SiC/Al6061 composites reinforced with high contents of SiC fabricated by pressure-assisted infiltration

Pressure-assisted infiltration was used to synthesize SiC/Al 6061 composites containing high weight percentages of SiC. A combination of PEG and glass water was used to fabricate SiC preforms and the effect of the presence of glass water on the microstructure and mechanical properties of the preforms was evaluated by performing compression tests on the preforms. Also, the compressive strength and the hardness of the SiC/Al composites were investigated. The results revealed that the glass water improved the compressive strength of the preforms by about five times. The microstructural characterization of the composites showed that the penetration of the aluminum melt into the preforms was completed and almost no porosity could be seen in the microstructures of the composites. Moreover, the composite containing 75 wt% SiC exhibited the highest compressive strength as well as the maximum hardness. The results of the wear tests showed that increasing the SiC content reduces the wear rate so that the Al-75 wt% SiC composite has a lower wear rate and a lower coefficient of friction than those of Al-67 wt% SiC composite. This indicated higher wear resistance in these composites than the Al alloy due to the formation of a tribological layer on the surface of the composites.     

Manufacture of Multilayered Artificial Cell Membranes through Sequential Bilayer Deposition on Emulsion Templates

Efforts to manufacture artificial cells that replicate the architectures, processes and behaviours of biological cells are rapidly increasing. Perhaps the most commonly reconstructed cellular structure is the membrane, through the use of unilamellar vesicles as models. However, many cellular membranes, including bacterial double membranes, nuclear envelopes, and organelle membranes, are multilamellar. Due to a lack of technologies available for their controlled construction, multilayered membranes are not part of the repertoire of cell-mimetic motifs used in bottom-up synthetic biology. To address this, we developed emulsion-based technologies that allow cell-sized multilayered vesicles to be produced layer-by-layer, with compositional control over each layer, thus enabling studies that would otherwise remain inaccessible. We discovered that bending rigidities scale with the number of layers and demonstrate inter-bilayer registration between coexisting liquid–liquid domains. These technologies will contribute to the exploitation of multilayered membrane structures, paving the way for incorporating protein complexes that span multiple bilayers.